FORMA 32 · Nastavljača
Langstroth US · Beesource 10 · woodenware
Uređiv koncept · studija prema izvoru
Uređiv koncept. Dio mjera slijedi navedeni izvor, ostale su autorske. Nijedna mjera nije dimenzijski potvrđena i ovo nije standard.
Beesource 1999 · 10-frame imperial construction drawing
Dimenzije
| Mjera | Vrijednost | Podrijetlo |
|---|---|---|
| Unutarnja širina | 374,6 mm | autorski odabir |
| Unutarnja dubina | 466,7 mm | autorski odabir |
| Visina plodišta | 244,5 mm | autorski odabir |
| Visina medišta | 168,3 mm | autorski odabir |
| Broj okvira / letvica | 10 | autorski odabir |
| Širina okvira | 482,6 mm | autorski odabir |
| Visina okvira | 231,8 mm | autorski odabir |
| Debljina okvira | 34,9 mm | autorski odabir |
| Razmak okvira | 34,9 mm | autorski odabir |
| Gornja letvica | 27 mm | autorski odabir |
| Debljine daske | 19,1 mm | autorski odabir |
| Nagib stijenke | 0° | autorski odabir |
| Nosivi utor | 9,5 mm × 15,9 mm | autorski odabir |
Podnica: solid. Krov: flat.
Izvori
- Beesource, 1999 — 10-FRAME LANGSTROTH BEEHIVE, single drawing sheet. Pristupljeno 2026-09-08.
Podupire: deep/medium body envelopes; 3/8 ×5/8 rest; reversible floor envelope; telescoping outer cover dimensions; 3/4 wood and cover plywood.
- Beesource, 1999 — DADANT TYPE FRAMES (FOR LANGSTROTH HIVE); source datum under review. Pristupljeno 2026-09-08.
Podupire: 19-inch top-bar length; 1-3/8 shoulder width; 9-1/8 deep end-bar height; assembled datum unresolved.
Nepoznanice
Ovo su otvorena pitanja ovog profila. Popis je dio podatka, a ne izostavljen detalj.
- Bee space na svakom sučelju nije definiran (beeSpaceInterfaces: null).
- Proizvodne tolerancije nisu definirane (tolerancesMm: null).
- Spojevi su konceptualni sudarni paneli, neprovjereni (joinery).
- Named US10 woodenware, not Georgian LR, British LR,8-frame or Farrar
- Purchased frames are not rendered: source end-bar height vs assembled top-bar datum remains unresolved
- Inner cover has5/8 rim and1/4 plywood but no groove seating datum; omitted rather than guessed
- Outer cover rests directly on upper body in this incomplete assembly; source inner cover must be resolved before full-hive seating
- Floor drawing gives1-7/8 overall and3/8 upper clearance; ply is3/4; lower3/4 space derived, joint grooves unmeasured
- Finger-joint pitch, metal rest gauge, handhold location, inner-cover hole corner radii and flashing gauge are undimensioned
- Only source exterior/rest/floor/cover solids are shown; butt-segment corner partition is not a box-joint machining model
- No source tolerances, physical frame-fit, wood movement, manufacturing or independent verification